Pneumatically actuated valve
flip-flop
|
|
| The pneumatically actuated valve automatically switches positions after
applying a short signal to the control port marked X. After applying
pressure to the control port, the position of the valve switches and if
there is a pneumatic cylinder connected to the output, for example, it will
extend. The signal can be short, or it can last for a long time. The moment
of signal introduction is important. As soon as the pressure of the
control signal is exhausted - the signal is interrupted, the valve is ready
for switching. After pressure is applied again to the control port, the valve
will switch and the cylinder will begin to retract. In this way, the valve can
be reversed using a single control signal. The valve can also be switched
manually in the event of a control signal failure. The control signal is
independent of the working supply and can have a different pressure. This valve series contains rubber gaskets. |
| Order codes | Technical data |
Dimensions | Data sheet (PDF) | Technical information |
Order codes
| Type | Port size | Order code | 3D CAD model |
Inquiry / Order |
| G1/4" | 2552 7070 0600 0007 |  |
 |